The common cutting machine failures are as follows, as well as the methods to prevent and solve these problems:

1.Decreased or uneven cutting quality of the cutting machine:

Prevention method: Regularly check the wear of the cutting tool, and replace the severely worn tool in time.

Solution: Adjust the cutter installation position of the cutting machine and the angle of the cutter to ensure that the cutting cutter is in the correct position.

2.The cutting speed of the cutting machine becomes slow or unstable:

Prevention method: keep the cutting machine clean, and regularly maintain and maintain the cutting machine.

Solution: Check the drive train and drive components of the cutter to make sure they are functioning properly and clean out any parts that may be clogged.

3.The cutting machine is noisy:

Prevention method: Regularly check whether the accessories and fasteners of the cutting machine are loose, and adjust and tighten them in due course.

Solution: Check whether the moving parts of the cutting machine are damaged or worn, and replace them in time if damaged.

4.Cutter breaks or breaks knives:

Prevention method: Use high-quality cutting knives to avoid excessive wear and damage to the knives.

Solution: Check the status of the tool regularly, if any problem is found with the tool, replace it immediately, and avoid continuing to use it.

5.Cutting machine failure occurs frequently:

Prevention method: strengthen the daily maintenance of the cutting machine, and carry out maintenance according to the manufacturer's maintenance manual.

Solution: Carry out a comprehensive inspection of the cutting machine, find out the cause of the failure and repair or replace damaged parts.

6.Cutter operation error:

Preventive method: Provide professional training to operators to ensure that they are familiar with the use of cutting machines and safe operating procedures.

Solution: When an operation error occurs, stop the operation of the cutting machine immediately, and check the cause of the error to avoid similar situations from happening again.

To sum up, the key to preventing cutting machine failures is regular maintenance, use of high-quality cutting tools, reasonable operation and training, and timely detection and resolution of failures. Regularly check the status of the cutting machine to ensure that it is in good working condition, which can improve the service life of the cutting machine and ensure production efficiency and product quality. At the same time, for some complex failures, you can seek the help of professional technicians to ensure the normal operation of the cutting machine.